Daikin FDXS12LVJU Operation Manual page 13

„ Operating conditions
„ Recommended temperature setting
• For cooling: 78-82°F (26-28°C)
• For heating: 68-75°F (20-24°C)
„ Tips for saving energy
• Be careful not to cool (heat) the room too much.
Keeping the temperature setting at a moderate level helps save energy.
• Cover windows with a blind or a curtain.
Blocking sunlight and air from outdoors increases the cooling (heating) effect.
• Clogged air filters cause inefficient operation and waste energy. Clean them once in about every 2 weeks.
„ Notes on the operating conditions
• The air conditioner always consumes a small amount of electricity even while it is not operating.
• If you are not going to use the air conditioner for a long period, for example in spring or autumn, turn the breaker off.
• Use the air conditioner in the following conditions.
MODE
Outdoor temperature: 50-115°F (10-46°C)
COOL Indoor temperature: 64-90°F (18-32°C)
Indoor humidity: 80% max.
Outdoor temperature: [2/3MXL]: –13-75°F (–25-24°C)
HEAT
Indoor temperature: 50-86°F (10-30°C)
Outdoor temperature: 50-115°F (10-46°C)
DRY Indoor temperature: 64-90°F (18-32°C)
Indoor humidity: 80% max.
• Operation outside this humidity or temperature range may cause a safety device to disable the system.
„ To change the temperature setting
Press
• The displayed items on the LCD will change whenever either one of the buttons is
pressed.
COOL operation
64-90°F
(18-32°C)
Press to raise the temperature and press
temperature.
Operating conditions
[Other models]: 5-75°F (–15-24°C)
or .
HEAT operation AUTO operation
50-86°F 64-86°F
(10-30°C) (18-30°C)
to lower the
If operation is continued out of this range
• A safety device may work to stop the operation.
(In multi system, it may work to stop the operation of the outdoor unit only.)
• Condensation may occur on the indoor unit and drip.
• A safety device may work to stop the operation.
• A safety device may work to stop the operation.
• Condensation may occur on the indoor unit and drip.
DRY or FAN operation
The temperature setting
cannot be changed.
Page 21
12