Monitoring Input And Playback Sounds - Zoom MicTrak M2 Operation Manual

Monitoring input and playback sounds

Input and playback sounds can be monitored using headphones, for example, and the monitoring volume
can be adjusted.
1.
Connect headphones, for example, to the PHONE/LINE OUT jack.
2.
Use to adjust the volume of the headphones or other connected device.
The volume will be shown on the display while it is being adjusted.
NOTE:
• The volume output from the PHONE/LINE OUT jack will be affected by changing the volume amplification
on the display.
• When nothing is connected to the PHONE/LINE OUT jack, using
built-in speaker.
• The built-in speaker cannot be used for monitoring while recording.
HINT:
• Adjust the volume after adjusting the volume amplification on the display.
display size to make checking
• Battery operation time can be lengthened by disconnecting headphones from the PHONE/LINE OUT jack
when headphone monitoring is not needed.
• The volume can be adjusted separately for the speaker and headphones.
(→ Adjusting the volume display size to make checking
easier)
easier)
36
will change the volume of the
(→ Adjusting the volume