Download Print this page
Mackie Art Series ART500 Specifications

Mackie Art Series ART500 Specifications

Two-way speaker system

Advertisement

Quick Links

ART Series

The same careful acoustic design and advanced
materials used in the ART active speakers have been
utilized in the ART500 passive speaker. Combining
high efficiency, high power handling and excellent
sonic performance, the ART500 provides practical
solutions for permanent installation applications.
The two-way design consists of a 15" woofer
with a 4" extended coil and a massive magnet struc-
ture for accurate, powerful bass reproduction. The
high-frequency section uses a Polynomial CD horn
loaded to a 2" exit titanium compression driver
and new technology, ring-mode suppression design,
to deliver controlled coverage at the highest sonic
purity. The CD horn is a part of the molded enclosure.
The system includes a high-level crossover
network that features oversized inductors in series
with the woofer, yielding improved current handling,
reduced phase shift and superior transient response.
Dynamic high-frequency driver protection is accom-
plished with a fast-response filament resistor,
chosen to compliment the power curve of the driver.
All components are housed in a light weight,
vented enclosure formed from polypropylene that
is extremely rigid and is weather resistant. In addi-
tion, the woofer is protected by a metal grille. All
controls and connectors are recessed on the rear.
A 1-3/8" stand socket and M10 threaded inserts
and are molded into the cabinet to provide quick
and easy installation using specially designed
accessory mounting hardware.
This Mackie Industrial product is covered by an
exclusive, one-time NO FAULT repair policy in addi-
tion to a five year, limited warranty.
ART500

Two-Way Speaker System

Features

80° x 60° constant-directivity horn with 2" exit
compression driver
15" high-gauss woofer
Compact, semi-trapezoidal polypropylene enclo-
sure
Built-in hand grips, M10 fly points and stand
socket
Optional installation accessories include hard-
ware for truss, grid, pipe and adjustable wall
mounts
Dual Speakon
connectors
®
Exclusive Mackie Industrial — one-time NO
FAULT repair policy
Five year, limited warranty
Live Sound/Music Reinforcement
High-Level AV Playback
Large Speech Systems
High-Level Passive Systems
1
O F 6 P A G E S

Advertisement

loading

Summary of Contents for Mackie Art Series ART500

  • Page 1 This Mackie Industrial product is covered by an exclusive, one-time NO FAULT repair policy in addi- tion to a five year, limited warranty.
  • Page 2: Specifications

    ART500 Two-Way Speaker System Specifications System Acoustic Frequency Range (–10 dB): Frequency Response (–3 dB): Horz. Coverage Angle (–6 dB): Vert. Coverage Angle (–6 dB): Directivity Factor; Q (DI): averaged 1kHz to 10kHz System Sensitivity Rated Maximum Peak System Input Power Rating 500 W, IEC;...
  • Page 3 ART500 Two-Way Speaker System ART500 Vertical Polars O F 6 P A G E S 200Hz 250Hz 0˚ 315Hz 400Hz 1.25kHz 1.6kHz 0˚ 2kHz 2.5kHz Vertical Off-Axis Frequency Response (UP) 8kHz 10kHz 0˚ 12.5kHz Vertical Off-Axis Frequency Response (DOWN) 16kHz...
  • Page 4 ART500 Two-Way Speaker System ART500 Horizontal Polars 0˚ 0˚ 0˚ O F 6 P A G E S 200Hz 250Hz 315Hz 400Hz 1.25kHz 1.6kHz 2kHz 2.5kHz Horizontal Off-Axis Frequency Response 8kHz 10kHz 12.5kHz 16kHz 0˚ 500Hz 630Hz 800Hz 1kHz 0˚...
  • Page 5 ART500 Two-Way Speaker System Frequency response is measured on-axis at a distance referenced back to 1m at 1-watt drive. Shown as a half space (2π) enviroment. Beamwidth vs. Frequency 15.74" (400mm) 8.26" (210mm) 8.11" (206mm) 10.47" (266mm) 14.77" (375mm) BOTTOM 17.88"...
  • Page 6 For this reason, any current Mackie Industrial product may differ in some respect from its published description, but will always equal or exceed the original design specifications unless otherwise stated.