Advertisement
Available languages
Available languages
Product Features
Introduction
Backlit LCD Display
Features
• Two-Way Radio
with up to a six (6)
mile (10 km) range
• 22 Channels
Call Tones and
(7 shared with
VibrAlert
FRS/GMRS,
7 FRS only,
8 GMRS only)
Signal Strength
Meter Icon
• 38 PRIVACY
Codes
Hi•Low
Power Icon
• Hands-Free
Operation (VOX)
• VibrAlert
®
Silent Paging
• Signal
Strength Meter
• Scan
(channel, privacy
code)
• Selectable
Hi•Low Power
(in GMRS)
• Backlit
LCD Display
• Call Alert
(10 selectable
tones)
Receive/
• Lock
Transmit
Tower Icon
• Speaker/
Microphone Jack
Main Channel
• "Roger Beep"
Numbers
(selectable On/Off)
• Battery/Power Saver
• Keystroke Tones
(selectable On/Off)
• Auto Squelch
• Maximum Range
Important FCC Licensing Information
Extender
This radio operates on General Mobile Radio
• Belt Clip
Service (GMRS) frequencies which require a
• Wrist Strap
Federal Communications Commission (FCC)
license. See page 18 for licensing and other
related information.
English
4
Lock Icon
Keystroke Tones Icon
Icon
™
Roger Beep Icon
Scan Icon
Vox Icon
CTCSS Privacy
Code Numbers
Power Saver
Icon
Battery Level
Indicator
Introduction
Operation
Caring for Your microTALK
Your microTALK
®
radio will give you years of trouble-free service if
cared for properly. Handle the radio gently. Keep the radio away from
dust. Never put the radio in water or in a damp place. Avoid exposure
to extreme temperatures.
Batteries
Remove Belt Clip
To Install or Replace Batteries:
1. Remove belt clip by releasing belt clip
latch and sliding clip up.
Pull Down Lock Latch
2. Pull down on the Battery Door Latch to
remove the battery compartment cover.
3. Insert four (4) AAA batteries. (Always use high
quality alkaline batteries.) Position batteries
Insert Batteries
according to polarity markings.
4. Replace Battery Compartment cover and belt clip.
Contact your local Cobra
or Cobra
charger accessories.
The Basics to Get You Started
Your microTALK
To get started, simply:
1. Rotate the On/Off Volume knob to
turn On your radio.
2. Press the Channel Up or Channel Down
button to select a channel.
Both radios must be tuned to the
same channel to communicate.
3. Press and hold the Talk button while
speaking into the microphone.
4. When finished talking, release the Talk
button and listen for a response.
Customer Assistance
Warranty
®
Radio
®
dealer
®
directly for optional
®
radio is easy to use.
Nothing comes close to a Cobra
™
•
•
5
Advertisement
