Table of Contents
Advertisement
SiriusXM Satellite Radio Operation
Direct Channel
Tuning
Channel Browsing
Category
Browsing
Mature Lock
Control
Pass Code Set
RESET
MXD340SXM
®
Channel number can be chosen directly as below.
Step #1 : Press and hold the volume knob.
Step #2 : Rotate the volume knob left or right to select the first digit of
the channel number. Example: CH2
Step #3 : Press the Channel Up button then rotate the volume knob left
or right to select the second digit of the channel number.
Example: CH25
Step #4 : Repeat Step #3 to select the third digit of the channel number.
Example: CH256 Then press the volume knob to tune to the
desired channel.
Press and hold the Channel Up or Channel down button, channels will
be rapidly browsed, the longer the Channel up or Channel down button
is pressed and held the channel browsing will become more rapid,
once the Channel Up or Channel down button is released the unit will
tune to the desired channel.
1. Long press AS/CAT button go to browsing mode. You will see "b"
flashing under Browsing mode. Then rotate volume knob to select
category. Press volume knob get into selected category.
(i) Short press
or
stay in desired category channel.
(ii) Long press
or
(iii) Press DISP button back to category list.
(iv) Long press AS/CAT button to exit category browsing mode.
2. When in Category Browse Mode you can press the DISP button to go
to the "All Channels" category directly.
Step #1 : Long press volume knob then release and immediately press
the DISP button to enter the pass code screen to access Mature
Parental Control.
Step #2 : Rotate the volume knob left or right to select the first digit of
the pass code number, (Default Pass Code is 0000)
Step #3 : Press the Channel Up button then rotate the volume knob left
or right to select the second digit of the pass code.
Step #4 : Repeat Step # 3 to enter the third and fourth digit of the pass
code then press the volume knob to enter the pass code then
rotate volume knob to the right to lock Parental Control
Mature Channels ON or rotate volume knob to the left to
unlock Parental Control Mature Channel, OFF. (Default is OFF)
1. Long press volume knob then release and immediately press
the DISP button twice to enter the current pass code then press
the volume knob.
2. Enter the new pass code then press the volume knob a
"SUCCESS" message will appear.
When the RESET button is pressed the unit will tune back to CH 1 and
reset all the Presets back to Factory Default (CH 1). The RESET button
is located behind the display panel. Press the release button located
in the lower right corner of the display panel. Remove the display panel
and press the RESET button then connect the display panel back on
the unit.
OPERATION
up and down category. Press volume knob to
selected category rapid browsing.
11
Advertisement
Table of Contents
