Cobra PR250WX Owner's Manual page 8

Mode Functions Mode Functions
Operation
Intro Operation Customer
Privacy Code Scan
Assistance
Your microTALK ® radio can automatically scan the Privacy Codes
(00 through 38) within one channel.
To scan privacy codes:
Select Channel
1. While in Standby mode, press the
Channel Up or Channel Down button
Secondary Icons
to choose the channel on which you
wish to scan privacy codes.
Mode/Power Button
2. Press the Mode/Power button until
the Scan icon and the privacy code
numbers flash on the display.
3. Press the Channel Up or Channel Down
Notice
Scan Privacy Codes button to begin scanning privacy codes
within the channel you selected.
The Scan icon will continue to be displayed
when privacy code scan is on. Your radio will
continue to scan privacy codes and stop as an
Channel Button
incoming transmission is detected. Your radio
will remain on that channel/privacy code for
10 seconds.
While setting privacy code scan, if you do not
press any buttons for 15 seconds your radio
will automatically return to Standby mode on
the channel/privacy code that was displayed
before you entered mode functions.
English
10
Warranty
Introduction
During scanning (while receiving an incoming transmission),
•
you can choose from the following:
a. Press and hold the Talk button to communicate on that
channel/privacy code. Your radio will remain on that
channel/privacy code and return to Standby mode.
b. Press the Channel Up or Channel Down button to
Secondary Icons
resume scanning privacy codes.
If you press the Talk button while scanning and not within
10 seconds of receiving a transmission, you will transmit on the
channel/privacy code on which you last received a transmission.
This will return the radio to Standby mode.
If you do not press any button within 10 seconds, your
radio will automatically resume scanning privacy codes.
During scanning (while not receiving a transmission),
you can choose from the following:
a. Press and hold the Talk button to communicate on
the channel/privacy code that was displayed before you
entered mode functions or the channel/privacy code on
which, during scanning, you last received a transmission.
This will return the radio to Standby mode.
b. Press the Mode/Power button to proceed to other functions.
c. Press the Lock button to return to Standby mode on the
channel/privacy code that was displayed before you entered
mode functions or the channel/privacy code on which,
during scanning, you last transmitted or received.
Operation
Customer Assistance Warranty
Intro Operation Customer
Assistance
Notice
Nothing comes close to a Cobra
Warranty
® 11