Table of Contents
Advertisement
5 Technical Descriptions
5.1.
Specification of KEY for CI Plus, DTCP-IP, WIDEVINE, Netflix and One-
to-One
5.1.1.
General information:
1. EEPROM (IC8902) for spare parts has the seed of KEY for each.
2. The final KEY data will be generated by Peaks IC (IC8000) when SELF CHECK was done and are stored in both Peaks IC
(IC8000) and EEPROM (IC8902).
Five KEY are not generated for all models.
The necessary KEY are only generated and stored depend on the feature of models.
5.1.2.
Replacement of ICs:
When Peaks IC (IC8000) is replaced, EEPROM (IC8902) should be also replaced with new one the same time.
When EEPROM (IC8902) is replaced, Peaks IC (IC8000) is not necessary to be replaced the same time.
After the replacement of IC, SELF CHECK should be done to generate the final KEY data.
How to SELF CHECK: While pressing [VOLUME ( - )] button on the main unit, press [MENU] button on the remote control for more
than 3 seconds.
TV will be forced to the factory shipment setting after this SELF CHECK.
5.1.3.
Model and Keys:
Model No.
TX-P50VT50B
TX-P50VT50Y
TX-PR50VT50
5.2.
USB HDD Recording
5.2.1.
General information:
Digital TV programmes can be recorded in USB HDD.
A One-to-One key generated in A-board by SELF CHECK binds TV and USB-HDD for communication.
That key is only one key for them. If the key is difference, TV can not access USB-HDD.
Caution:
New key will be generated by following SELF CHECK and previous TV programmes recorded in USB HDD will not be
viewed.
SELF CHECK: While pressing [VOLUME ( - )] button on the main unit, press [MENU] button on the remote control for
more than 3 seconds.
One-to-One
CI Plus
(For USB Rec.)
Yes
Yes
Yes
Yes
None
Yes
Keys
DTCP-IP
WIDEVINE
Yes
Yes
Yes
Yes
None
Yes
11
Netflix
Yes
Yes
Yes
Advertisement
Table of Contents
