Handsfreelink (Hfl) - Acura MDX 2019 Service Bulletin
Hide thumbs
Also See for MDX 2019:
- Personalized settings (5 pages) ,
- Manual (6 pages) ,
- Service bulletin (9 pages)
Advertisement
16.
Check the Head-Up Warning (HUW) Indicator (If Equipped)
When you first turn the ignition to ON, the HUW indicator should blink and then go off.
®
17.
Check Bluetooth
To ensure HFL works and is ready to use, start the engine, then press and hold the Hang-up/Back button on the steering
wheel for 10 seconds. You should hear "The TCU is OK." If you do not hear this message, see the service information
for troubleshooting information.
18.
Check the Moonroof One-Touch Feature
Make sure the moonroof one-touch feature works properly:
•
When you firmly pull the moonroof switch back and release it, the moonroof should fully open.
•
When you firmly push the switch forward and release it, the moonroof should fully close.
•
When you push up on the switch and release it, the moonroof should tilt.
If the moonroof does not work properly, do the moonroof control unit reset procedure in the service information.
®
HandsFreeLink
(HFL)
Page 11 of 13
Advertisement
