- On/off-AM/FM button
|
- Press the button to switch on the device.
- Press the button again to select the frequency (FM: 87.5 - 108 MHz)(AM: 522-1620 MHz).
- Press and hold the button to switch off the device.
- When the alarm sounds, press the button to stop the alarm.
- If the device is disrupted by a strong electric magnetic field, reset the device or put it in another location.
|
- Hour button
- Minute button
|
- Simultaneously press the buttons and the time set button to set the correct time.
- Simultaneously press the buttons and the on/off button to select a radio station.
|
- Time/Set /M+ button
|
- Press and hold the button. The display flashes.
- Set the time: After selecting the hours and minutes with the hour button and the minute button, press the button to set the time.
- Preset frequencies (10 AM and 10 FM): After selecting the frequency, press and hold the button to enter preset mode. The preset number shows in the display. Press the hour button or the minute button to select the radio station. Press the button to preset the selected radio station. Do these steps again to complete the next presets.
|
- Alarm 1/ Volumebutton
- Alarm 2/ Volume + button
|
- Press the button to increase or decrease the volume.
- In clock display mode, press the button to select alarm by buzzer. Press the button twice to set alarm by radio. In the display, the buzzer icon or the radio icon shows and the alarm time flashes. Set the alarm time with the hour button and the minute button.
|
- Sleep/snooze button
|
- Sleep mode: On radio playing mode, press the button to enter sleep mode. The display by default shows '90' for minutes of sleep time. Press the button repeatedly to select the sleep time: 90-80-70-60-50-40-30-20-10 or OFF. After timer countdown, the radio will stop playing and shut off automatically.
- Snooze function: On alarm sound mode, press the button. The alarm will go off again after 9 minutes.
- On time display mode, press and hold the button to select the lighting of the display: off, low or high.
|
- AUX inlet
|
- Use the AUX input to connect the device to a MP3 player, smartphone or tablet.
- Press the button repeteadly until 'AUX' shows in the display. The music of the external player is transferred through the speakers of the device. if necessayr, adjust the volume.
|
- Battery compartment
|
- Put AAA batteries (2x) to have a backup power system in the case of power failure.
|
- LED display
|
- The display shows the time in 24 hours presentation.
- If the display flashes, the power connection has been interrupted and restored. Reset the time and the alarm time.
|
Need Assistance?
Do you have a question about the CLAR002BK that isn't answered in the manual? Leave your question here.