Safety Instructions - MSI MS-7267 Instruction Manual

Safety Instructions

n
Always read the safety instructions carefully.
n
Keep this User Manual for future reference.
n
Keep this equipment away from humidity.
n
Lay this equipment on a reliable flat surface before setting it up.
n
The openings on the enclosure are for air convection hence protects the equipment
from overheating. Do not cover the openings.
n
Make sure the voltage of the power source and adjust properly 110/220V before
connecting the equipment to the power inlet.
n
Place the power cord such a way that people can not step on it. Do not place
anything over the power cord.
n
Always Unplug the Power Cord before inserting any add-on card or module.
n
All cautions and warnings on the equipment should be noted.
n
Never pour any liquid into the opening that could damage or cause electrical shock.
n
If any of the following situations arises, get the equipment checked by a service
personnel:
- The power cord or plug is damaged.
- Liquid has penetrated into the equipment.
- The equipment has been exposed to moisture.
- The equipment does not work well or you can not get it work according to User
Manual.
- The equipment has dropped and damaged.
- The equipment has obvious sign of breakage.
n
Do not leave this equipment in an environment unconditioned, storage temperature
above 60° C (140°F), it may damage the equipment.
CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with
the same or equivalent type recommended by the manufacturer.