Troubleshooting Guide - Black & Decker BDCSFL20CTG Instruction Manual

policy for exchanges. Proof of purchase may be required.
Please check with the retailer for its specific return policy
regarding time limits for returns or exchanges. The
second option is to take or send the product (prepaid) to
a BLACK+DECKER owned or authorized Service Center for
repair or replacement at BLACK+DECKER's option. Proof
of purchase may be required. BLACK+DECKER owned
and authorized service centers are listed online at www.
blackanddecker.com.
This warranty does not apply to accessories. This warranty
gives you specific legal rights and you may have other
rights which vary from state to state. Should you have
any questions, contact the manager of your nearest
BLACK+DECKER Service Center. This product is not intended
for commercial use, and accordingly, such commercial use
of this product will void this warranty. All other guarantees,
express or implied, are hereby disclaimed.
lATin AMERiCA: This warranty does not apply to products
sold in Latin America. For products sold in Latin America,
check country specific warranty information contained in
the packaging, call the local company or see the website for
such information.
Imported by Black & Decker (U.S.) Inc.,
701 E. Joppa Rd.
Towson, MD 21286
BlackandDecker.com
1-800-544-6986

Troubleshooting Guide

BE sURE TO FOllOW sAFETY RUlEs AnD insTRUCTiOns
For assistance with your product, visit our website www.blackanddecker.com for the location of the service center nearest
you or call the BLACK+DECKER help line at 1-800-544-6986.
PROBLEM
- Unit will not start.
Battery will not charge.
-
- Unit shuts off abruptly.
POSSIBLE CAUSE
- Battery pack not charged.
- Internal componets too hot.
Jack plug not inserted
-
into charge port.
- Charger not plugged in.
- Surrounding air temperature
too hot or too cold.
- Battery has reached its
maximum thermal limit.
Out of charge. (To maximize
-
the life of the battery pack it is
designed to shut off abruptly
when the charge is depleted.)
English
POSSIBLE SOLUTION
- Check battery pack
charging requirements.
- Allow tool to cool down.
Insert jack plug into charge port.
-
- Plug charger into a working
outlet. Refer to "Important
charging notes" for
more details.
- Move charger and battery
pack to a surrounding air
temperature of above 40
degrees F (4,5°C) or below
105 degrees F (+40,5°C).
- Allow tool to cool down.
- Insert jack plug into charge
port and allow to charge.
9