Related Manuals for QSC Q-SYS NM-T1
Summary of Contents for QSC Q-SYS NM-T1
- Page 1 ® ™ Hardware User Manual NM-T1 Tabletop Conference Microphone TD-001639-01-A *TD-001639-01*...
-
Page 2: Important Safety Instructions
QSC authorized service station or an authorized QSC international distributor. QSC is not responsible for any injury, harm or related damages arising from any failure of the customer, owner or user of the apparatus to facilitate those repairs. -
Page 3: Fcc Statement
The QSC Q-SYS NM-T1 is in compliance with European Directive 201 1/65/EU – Restriction of Hazardous Substances (RoHS2). The QSC Q-SYS NM-T1 is in compliance with “China RoHS” directives per GB/T 26572. The following chart is provided for product use in... -
Page 4: What's In The Box
What’s in the Box (1x) (1x) (1x) NM-T1 Mounting pipe Mounting pipe locking nut (2x) (1x) (3x) Isolation ring Strain relief cap M3 x 0.5mm Screws (1x) (1x) (1x) 3m CAT6 cable Warranty Safety information statement Connections and Controls Bottom Mute Buttons: Four touch-sensitive buttons control the mute Q-LAN/PoE Port: For Q-LAN connection. -
Page 5: Freestanding Installation
4. Guide the cable and Mounting Pipe through the hole in the table. From under the table, guide the cable through the Isolation Ring and Mounting Pipe Locking Nut. (Figure 8). 5. Ensure proper orientation of the microphone – the QSC logo indicates the front of the microphone. -
Page 6: Customer Support
For a copy of the QSC Limited Warranty, visit the QSC, LLC., website at www.qsc.com. © 2022 QSC, LLC. All rights reserved. QSC and the QSC logo, Q-SYS, and the Q-SYS logo are registered trademarks of QSC, LLC in the U.S. Patent and Trademark Office and other countries.