Fluke 3562 Getting Started Manual page 11

Getting started with Screening Vibration Sensor System
5. In Test Points Editor, click Add test point.
Click the 3562 Screening Vibration Sensor Select tab.
 Edit test point name
 Define test point position
 Define sensor orientation at the test point
 Click Assign Sensor to assign a sensor to the test point
Click to refer to the online help for detailed information.
6. Use Tasks and Alarms Editor to configure the process parameters and vibration
overalls to be measured, and the alarm limits to be set. Recommended alarm
limits based on verified ISO standards and experience may be applied. Click
for details.
8