Evaluation Test - Panasonic PS-A Quick Start Manual

Pressure sensor
Table of Contents

Advertisement

6 Temperature/humidity cycle test
ADP51B61
Exposed to 10 cycles in the temperature
and humidity conditions given below.
Applied pressure : 0kPa
1 cycle (24h)
Temp.
65 °C
149 °F
65 °C
149 °F
25 °C
77 °F
2.5h
3h
2.5h 2.5h
3h
2.5h
1.5h
Time
□□□ 
95% RH

Evaluation test

Classifi cation
Tested item
Storage at high temperature Temperature : Left in a 85 °C
Storage at low temperature Temperature : Left in a –20 °C
Environmental
characteristics
Humidity resistance
Temperature cycle
Endurance
High temperature/
characteristics
high humidity operation
Vibration resistance
Mechanical
Dropping resistance
characteristics
Terminal strength
Solderbility
Soldering
Characteristics
Heat resistance (DIP)
Items
Offset voltage
Rated Output Voltage
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
1.00
0.80
0.60
 
0.40
25 °C
−10 °C
77 °F
14 °F
0.20
3.5h
3h
0.00
0% RH
intial
Temperature/humidity : Left at 40 °C
Temperature : –20 °C to 85 °C
Temperature/humidity : 40 °C
Operation times : 10
Double amplitude : 1.5 mm
Applied vibration direction : X, Y, Z 3 directions; Times : 2 hrs each
Dropping height : 75 cm
Pulling strength : 9.8 N {1 kgf}, 10 sec.;
Bending strength : 4.9 N {0.5 kgf}, left and right 90 ° 1 time
Temperature : 230 °C
Temperature : 260 °C
Variation amount
within ±2.5%FS of value
Pressure Sensor/PS-A (ADP5)
4.50
4.30
4.10
 
3.90
3.70
3.50
10 cyc
Tested condition
185 °F
constant temperature bath; Time : 100 hrs. Passed
–4 °F
constant temperature bath; Time : 100 hrs. Passed
104
°F, 90 % RH; Time : 100 hrs.
–4 °F to 185
°F; 1 cycle : 30 min.; Times of cycle : 100 Passed
104
°F, 90% RH;
6
, rated voltage applied
0.059
inch; Vibration : 10 to 55 Hz;
29.528
inch; Times : 2 times
446
°F; Time : 5 sec.
500
°F; Time : 10 sec.
Criteria
intial
10 cyc
Result
Passed
Passed
Passed
Passed
Passed
Passed
Passed
01
Feb. 2019

Advertisement

Table of Contents
loading

Table of Contents