Page 2
mportant! It is essential that you read the instructions in this manual before assembling, operating, and maintaining the product. Subject to technical modifications.
Page 3
ABS1858B *The product can be used with either an 18V or 58V battery pack.
Page 5
HOSE TRIGGER NOZZLE WAND TANK LID BASKET FILTER TANK BATTERY RELEASE (58V) ON/OFF SWITCH SHOULDER STRAPS BATTERY ADJUSTABLE NOZZLES BACKPACK FLOW RATE KNOB HARNESS...
Page 6
CHANGING THE NOZZLE OPERATING THE PRODUCT PURGING THE SPRAYER FILLING THE TANK INSTALLING/REMOVING THE BATTERY PACK (18V) INSTALLING/REMOVING THE BATTERY PACK (58V)
Page 7
SECURING THE HARNESS CLEANING THE PLASTIC FILTER GETTING STARTED CLEANING THE PRODUCT REPLACING THE PICK UP TUBE STORING THE PRODUCT...
GETTING STARTED CAUTION: Be careful not to cross- thread the nozzle wand when attaching to the trigger assembly. Cross-threading can strip the thread on the trigger and make the product unusable.
Page 28
STOP PURGING THE SPRAYER NOTE: Purge and clean the sprayer after every use to maintain the performance and the longevity of the seals and filters within the product.
Page 29
NOTE: Drain any leftover chemicals into a container. NOTE: Fill the tank to 25% capacity with clean water. A small amount of mild detergent may be added.
Page 30
click NOTE: Once the battery pack has been reinserted, press the trigger to spray the water mist into a container. Spray until the tank is completely empty.
Page 31
NOTE: Wipe down the sprayer and allow the tank to dry before operating the product with new chemicals or solutions.
CLEANING THE PRODUCT NOTE: Clean the product with a soft, dry cloth or soft brush only. Do not use water to clean the product.
Page 33
STORING THE PRODUCT NOTE: Remove the battery pack before storing the product. click click...
Page 34
click NOTE: Always store the product in a vent cool, dry, well-ventilated area. rece take chem ferti Do n do n prod...
Page 35
TECHNICAL DATA BACKPACK SPRAYER ABS1858B/ADVBPS14 Rated voltage 18 V / 58 V d.c. Working pressure max 90PSI / 6.2 bar (static pressure) Operating temperature max 40° C Residual solution in tank max <0.25 L Gross mass (empty) 6.2 kg (without battery)
Page 36
Prevent unintentional starting. Ensure the switch is in the off-position Do not expose a battery pack or tool to fire or excessive temperature. leak before connecting to power source and/or battery pack, picking up or Exposure to fire or temperature above 130°C may cause explosion. prod carrying the tool.
ure. leaks, clogged nozzles, and missing or damaged parts. Have damaged Too high or too low pressure or unfavourable weather conditions can result product repaired before use. Many accidents are caused by poorly maintained in the wrong solution concentration. Overdosing may damage plants and the products.
DISPOSAL Drain all chemical solutions from the product after each use. Never dispose of residual chemicals or contaminated rinsing solutions in waterways, drains, sewers, street gutters, or manholes. Do not dispose of electric tools together with household Dispose of residual chemicals, contaminated rinse water, and used containers waste material.
Page 40
Techtronic Industries Australia Pty Ltd 31 Gilby Road, Mount Waverley, VIC, 3149, Australia Techtronic Industries N.Z. Limited Unit C, 70 Business Parade South, Highbrook, Auckland 2013, New Zealand AEG is a registered trade mark used under 960087657-01 license from AB Electrolux (publ).