MSI Wind U110-031US User Manual page 42

3-4
1. The ECO and Hybrid Storage
Power Saving Function may be
optional supported depending
on the model users purchased.
2.
Please contact the local dealer
for detailed information, if
needed.
4. If "YES" is selected in the previous step to enable the power saving function, the hard disk drive
will at once be powered off temporarily to achieve better power saving performance.
5. In the meanwhile the hard disk drive is powered off, any application installed in the hard disk
drive will not be able to be activated, and any accessing operation from the hard disk drive will
also not be allowed.
6. Any attempt to access the hard disk drive may bring the pop-up Error Message shown on the
screen. Simply select Cancel or Enter to skip the Error Message.
7. Be aware of that the solid state disk will be the main storage device dealing with all the
accessing tasks while the ECO and Hybrid Storage Power Saving function is enabled.
8. To power on the hard disk drive, simply press the Fn and F10 buttons repeatedly until the ECO
and Hybrid Storage Power Saving function is disabled.
9. Note that it may take a while to power on the hard disk drive afresh.
10. Read the icon on behalf of the ECO Power Saving function and Hybrid Storage Power Saving
function appearing on the display to learn the power saving function status.
Low High
Display Panel Brightness
Showing the brightness level of the display panel.
The lower brightness level of the display panel, the better
power saving performance achieved.