Battery Installation - Cobra MicroTalk How To Use Manual

310WX.MANUAL.qx copy 6/17/99 12:18 PM
Operation
Battery Install Batteries
Installation
Note
Batteries not included with
MicroTalk 2-way radio.
A.
2 Remove belt clip by (A.) pulling tab out and
(B.) Sliding belt clip up and off unit.
2
Page 2
Clear antenna.
1
B.
Pull lock tab down Insert four "AAA"
3 4
and lift door up batteries. Position
(towards you) to batteries according
remove battery to po l a ri ty marki n g s.
cover.
Operation
Note
Always use high quality
alkaline or NiMH batteries.
Incorrect positioning can
damage both the batteries
and the unit.
Only the Cobra NiMH
battery (Part # FA-BP)
pack can be recharged.
See Accessories on page 54.
Charge ports for recharging
NiMH (Nickel Metal
Hydride) battery pack are
located on back of unit.
Note
When batteries are low or
need charging the
BATT LOW indicator will
blink. Replace alkaline
batteries or recharge NiMH
battery pack.
3