Table of Contents
Advertisement
Getting through narrow spaces
If your refrigerator will not fit through an
entrance area, you can remove the doors.
Check first by measuring the entrance.
To prepare for removing the doors:
1 Make sure the electrical power cord is
unplugged from the wall outlet.
2 Open the freezer drawer and remove the
toe grille (see "Installation" section).
3 Remove any food from the door shelves
and close the doors.
To remove the top hinge covers:
1 Remove the two (2) screws from each
cover over the top door hinges.
2 Lift inside edge of hinge cover and tilt
back.
Top hinge
cover
Hinge
screws
Multi-wire
cables
Leave
hinge
with
door
Great user manuals database on
DOOR REMOVAL INSTRUCTIONS
Front
cover screw
NOTE
DO NOT remove the ground screw from
hinge.
To remove the refrigerator doors:
1 Trace lightly around the door's top hinges
with a pencil. This makes reinstallation
easier.
Rear
cover
screw
Ground
2 Disconnect the harness by grasping both
screw
sides of the connector firmly, depress the
latch, and pull apart. Remove the two (2)
screws from the top hinge. Lift the door
Top
off of the bottom hinge and set it aside.
hinge
UserManuals.info
9
Advertisement
Table of Contents
