MSI GE600 User Manual page 103

4-10
The Password Check item is used to specify the type of BIOS password
protection that is implemented. Settings are described below:
The password is required only when users try to access to
Setup
BIOS SETUP UTILITY.
The password is required every time when the Notebook is
Always powered on or when users try to access to BIOS SETUP
UTILITY.
To clear a set Supervisor Password/ User Password, just press [Enter]
under Supervisor Password/ User Password field when you are
prompted to enter the password.
Password has been cleared, User Password will be cleared as well. A
message box will pop up confirming password will be disabled. Once the
password is disabled, the system will boot and user can enter setup without
entering password.
Please note that when Supervisor