僅 Defrosting Outside Windshield; 僅 Auto Defogging System - Kia Sorento 2023 Owner's Manual

Features of your vehicle
Defrosting outside windshield
OMQ4040343
1. Set the fan speed to the highest posi-
tion.
2. Set the temperature to the extreme
hot (HI) position.
3. Press the defroster button (
4. The outside (fresh) air position will be
selected automatically and the air
conditioning will turn on according to
the detected ambient temperature.
Auto defogging system (if
equipped)
Auto defogging helps reduce the possi-
bility of fogging up the inside of the
windshield by automatically sensing the
moisture on inside the windshield.
OMQ4040561BR
5 156
The auto defogging system oper-
ates when the heater or air condi-
tioning is on.
When the Auto Defogging System oper-
ates, the indicator will appear.
If a high amount of humidity is detected
in the vehicle, the Auto Defogging Sys-
tem will be enabled.
The following steps will be performed
automatically:
1. The A/C button will turn ON.
2. The air intake control will change to
Fresh mode under low outside tem-
perature.
3. The mode will be changed to defrost
to direct airflow to the windshield.
4. The fan speed will be increased.
).
To cancel or reset the Auto Defogging
System
Press the front windshield defroster but-
ton for 3 seconds when the ENGINE
START/STOP button is in the ON posi-
tion.
When the Auto Defogging System is
canceled, defrost button indicator will
blink 3 times.
When the Auto Defogging System is
reset, defrost button indicator will blink 6
times without a signal.
NOTICE
僅 When the air conditioning is turned on
by Auto defogging system, if you try
to turn off the air conditioning, the
indicator will blink 3 times and the air
conditioning will not be turned off.
僅 To maintain the effectiveness and
efficiency of the Auto Defogging Sys-
tem, do not select Recirculation mode
while the system is operating.
僅 When the Auto Defogging System is
operating, the fan speed adjustment
Windshield defrosting and defogging