LG HS200 Service Manual page 9

9. Brightness Inspection
(1) Measure with PT Mode
(2) Select "ADJ" on the remote control and enter adjustment
mode number 9, " DDP Optic Check".
(3) Brightness Specification : Min -> More than 140 ANSI lm
(Typ -> 170 ANSI lm)
10. FM Wireless Audio Inspection
10-1. Used Device
(1) 1 FM Radio
(2) 1 Remote Control
(3) 1 DVD Player or a Set-top Box (Equipment capable of
audio output)
(4) 1 RCA to Stereo cable
10-2. Equipment Composition
10-3. Adjustment Method
(1) Organize as shown on Fig.8.1 and configure as shown
below.
- FM Radio : Set frequency to 90Mhz.
- Projector : Enter :MENU"->AUDIO", and select FM
Wireless Audio "ON" with the remote control.
- DVD Player or Set-top box : Play the source capable of
(2) Verify the audio output of FM Radio by repeating
"ON"->"OFF"->"ON" of the FM Wireless Audio
"ON"->OFF"->" ON"
- FM Wireless Audio "ON" : Audio is output to FM Radio
instead for Set Speaker when operating properly.
- FM Wireless Audio "OFF" : Audio is not output to FM
Radio but output to Set Speaker when not operating
properly.
Copyright © 2009 LG Electronics. Inc. All right reserved.
Only for training and service purposes
audio output.
- 9 - LGE Internal Use Only