Loading Batteries Into The Remote Control - Hitachi PJTX200J User's Manual And Operating Manual

Preparations

Loading batteries into the remote control

Please load the batteries before using the remote control. If the remote control
starts to malfunction, replace the batteries. If you will not use the remote control
for an extended period, remove the batteries from the remote control and store
them in a safe place.
1. Remove the battery cover. Slide the battery cover back
in the direction of the arrow and remove.
2.
Take old batteries out and/or put new batteries in.
When putting batteries in, insert the two AAA batteries
according to their plus and minus terminals as indicated
on the remote control.
3.
Close the battery cover. Replace the battery cover in the
direction of the arrow and snap it back into place.
WARNING
directed. Batteries may explode if mishandled. Mishandling may also result in
cracking or leakage, which could in turn result in fire, injury and/or pollution of
the surrounding environment.
• Do not recharge, short circuit, solder, disassemble or dispose of batteries in fire
or water.
• Be sure to use only the batteries specified. Do not use different types of
batteries together. Do not mix new and old batteries.
• Make sure the plus and minus terminals are correctly aligned when loading
batteries.
• Keep batteries away from children and pets.
• Keep batteries in a dark, cool and dry place.
• Do not drop, hit or otherwise jar the battery in anyway.
• If you notice battery leakage, clean out the liquid and then replace the battery. If
any of the liquid gets on your body or clothes, immediately rinse well with water.
• Obey local laws on battery disposal.
18
► Always handle batteries with care and use them only as