Table of Contents
Advertisement
NLTroubleshooting
Malfunction
"E:60 / -2B"
"E:30 / -10" and/or
"E:35 / -10"
46
Cause and Troubleshooting
The unbalance detection system has interrupted the
spin cycle due to uneven distribution of the laundry.
Redistribute the laundry in the drum.
▶
Remark:If possible, place large and small items of
laundry together in the drum. Different sized laundry
is more evenly distributed during the spin cycle.
Water pressure is low.
No solution possible.
Strainer in the water supply is clogged.
▶ Clean the strainer in the water supply.
Water tap is closed.
Open the water tap.
▶
Water supply hose is kinked or pinched.
Make sure that the water supply hose is not
▶
kinked or pinched.
Water level measuring system defective.
Remark:With the error message, the device starts a
pump-down procedure.
First, wait for approx. 5 minutes until the pump-down procedure
1.
has ended.
To reset the error message, turn off the device.
2.
Turn the device back on.
3.
If the error message appears again, please contact
4.
customer service.
→
"Customer Service", page 58
Water in the bottom tray.
Close the tap.
▶
Please contact customer service.
▶
→
"Customer Service", page 58
Device is leaking.
Close the tap.
▶
Please contact customer service.
▶
→
"Customer Service", page 58
Detergent drawer is not fully retracted.
▶ Slide in the detergent drawer until the symbol goes out.
Pump unit is not installed.
Advertisement
Table of Contents
