Table of Contents
Advertisement
Getting Started
Your Detector
Controls
While working with this manual, page A2 can be folded out for reference
to the controls on the detector unit.
Power On/Off And Audio Volume
To Turn On the Unit and Adjust the Audio Volume
Tone
None
Rotate the On-Off /
Volume control clockwise
(away from you).
Unit will cycle through
Power On / Self Test.
Alert Settings will scroll.
Three beeps
Check marks indicate
which are set. (Factory
defaults are shown when
the unit is new.)
Shows only when the
None
Optional GPS Locator is
installed. See page 33
for more information.
None
Standby screen will show
City or Highway and Car
Battery Voltage icons.
Compass and IntelliMute will
also show if turned On and
set in the User Settings Menu.
English
6
•
•
Visual Display
Voice
None
Testing, then
three beeps
None
System Ready
Getting Started
Your Detector
NOTE
In some vehicles, power is supplied to the cigarette lighter even while the ignition
is Off. If this is the case with your vehicle and you have turned the SmartPower
Off, you should turn Off or unplug your detector when parking for lengthy periods.
Cobra recommends leaving SmartPower at the factory setting, which is On.
SmartPower is described on page 22.
Standby Screen Icons
Compass
City Mode
Highway Mode
(Southeast)
IntelliMute Above
IntelliMute Below
User and Alert
Activation Point
Activation Point
Settings Menu
NOTE
For example, the sample screen above indicates that IntelliMute is active,
the Compass is calibrated, your system is set to City mode and your
vehicle's battery voltage is 13.6. The GPS icon will appear in the center
of the screen only when the GPS Locator is connected.
•
Car Battery
Voltage
Sample Screen
(See note)
Nothing Comes Close to a Cobra
®
7
Advertisement
Table of Contents
