(Bracket Recording); Bracket Recording - Panasonic Lumix DC-TZ220D Operating Instructions Manual

Taking Pictures While Adjusting a Setting
Automatically
Recording mode:
You can take multiple pictures while automatically adjusting a setting by pressing the
shutter button.
1
Set the menu
→
(Exposure Bracket)
(Aperture Bracket)
(Focus Bracket)
(White Balance Bracket)
2
Press
• For information on [More Settings], refer to the page that describes each function.
• Press the shutter button halfway to exit the menu.
3
Focus on the subject and take a picture
• When Exposure Bracket is selected, the bracket display flashes until all of the
pictures you have set are taken. If you change the bracket settings or turn off
the camera before all of the pictures you have set are taken, the camera restarts
recording from the first picture.
■
To cancel [Bracket]
Select [OFF] in step
127

(Bracket Recording)

[Rec] → [Bracket] → [Bracket Type]
Press the shutter button to perform recording while adjusting
the exposure.
Press the shutter button to perform recording while adjusting
the aperture.
• Available in Aperture-Priority AE Mode or when the ISO
Press the shutter button to perform recording while adjusting
the focus position.
Press the shutter button once to take three pictures with
different white balance settings automatically.
to select [More Settings] and then press [MENU/SET]
1
.
(→128)
(→129)
sensitivity is set to [AUTO] in Manual Exposure Mode.
(→129)
4K Photo and Drive Settings
(→106)