Advertisement
Henan Master Machinery Co., Ltd
Tel:(+86)17737606271
www.mastermachinerys.com
2.
Simplicity of operating: one person operation, need not training.
3. Pre-setting angle scope from 0-360 degree by adjusting the pin on
work plate.
4. Instillation and using method.
1 Before installing, check the machine, keep nut tension and wiring in
good condition.
2 Installing earth leakage circuit breaker before using
3 How to use:
A) Adjusting the clearance between baffle and center pin, keep the
baffle parallel with steel bar.
B) According the needed angle, adjusting angle pin in the working plate,
clockwise rotation made the angle smaller, counter clockwise rotation
made the angle larger.
C) Using dual feet switch to control.
4 Maintenance of the Machine:
A ） .Add oil according to the instructions before running the machine,
running the machine with insufficient oil is strictly prohibited.
B ） Do not use poles with small diameter to bend steel bars with
maximum diameter.
C ） The disassembly of the machine must be conducted by
professionals.
D）If the machine is not to be used in a long period of time, the machine
needs to be coated with anti-rust grease on its surface and then keep it
in dry area
4
Advertisement
