Figure 4-22: Confirm New Settings Screen; Figure 4-23: Congratulations Screen - Linksys WUSB54GX4 User Manual

Wireless-G USB Network Adapter with SRX400
5. The next screen displays all of the Adapter's settings. If these are correct, click Save to save these settings to
your hard drive. If these settings are not correct, click Back to change your settings.
6. After the software has been successfully installed, the Congratulations screen will appear. Click Connect to
Network to connect to your network. Click Return to Profiles screen to open the Wireless Network
Monitor's Profiles screen. For more information about the Wireless Network Monitor, refer to "Chapter 5:
Using the Wireless Network Monitor."
To check the link information, search for available wireless networks, or make additional configuration
changes, refer to "Chapter 5: Using the Wireless Network Monitor."
Chapter 4: Setting Up and Connecting the Wireless-G USB Network Adapter with SRX400
Setting Up the Adapter
Congratulations! Setup is complete.

Figure 4-22: Confirm New Settings Screen

Figure 4-23: Congratulations Screen

16