Figure 4-7: Psk2 Needed For Connection; Figure 4-8: Congratulations - Linksys WUSB54GR User Manual

Wireless-G USB Network Adapter with RangeBooster
If your network has the wireless security PSK2 (Pre-shared key 2) enabled, this screen will appear.
Passphrase - Enter your network devices' passphrase, also called a pre-shared key, of 8-63 characters in the
Passphrase field.
Then click Connect and proceed to Step 3.
3. After the software has been successfully installed, the Congratulations screen will appear. Click Connect to
Network to connect to your network. For more information about the Wireless Network Monitor, refer to
Chapter 5: Using the Wireless Network Monitor.
Congratulations! The installation of the Wireless-G Notebook Adapter is complete.
To check the link information, search for available wireless networks, or make additional configuration
changes, proceed to Chapter 5: Using the Wireless Network Monitor.
Chapter 4: Setting up and Connecting the Wireless-G Network Adapter with RangeBooster
Setting up the Adapter

Figure 4-7: PSK2 Needed for Connection

Figure 4-8: Congratulations

11