Linksys WPC200 Quick Installation

Wireless-G
Business
Notebook
Adapter
with RangeBooster
Package Contents
• Wireless-G Business Notebook
Adapter with RangeBooster
• Setup Wizard CD-ROM
• User Guide on CD-ROM
• Quick Installation
Model No. WPC200
Model No.
Model No.
1

Install the Adapter

IMPORTANT: Do not connect the Adapter to your
PC until you are instructed to do so or the
Adapter will not install correctly.
The Notebook Adapter is set up
using the Setup Wizard that comes
on the enclosed CD.
A
To begin, insert the Setup
Wizard CD-ROM into your
CD-ROM drive. The Setup
Wizard should run
automatically, and the
Welcome screen should
appear.
B
To install the Adapter, click
Click Here to Start on the
Welcome screen.
C
After reading the License
QUICK INSTALLATION
Agreement, click Next to
begin the installation and
Windows will copy the files
onto your PC.
D
Insert the connector end of
the Adapter into an available
BUSINESS SERIES
PCMCIA or CardBus slot on
your notebook PC. Click Next.
It may take a minute for the
next screen to appear.
Proceed to Step 2.
2
The next screen to appear will be the
Available Wireless Networks screen. If
your network appears on the list,
continue with this quick installation.
If your network does not appear on
the list, click the Manual Setup
button and refer to the User Guide
on the CD-ROM.
IMPORTANT: Use this document
only if your network appears on your
Available Wireless Networks screen.
Setting Up the Adapter with
Available Networks
On the Available Wireless Networks
B
screen, the available networks are
listed in the center table by SSID.
Select the wireless network you wish
to connect to and click the Connect
button. (If you do not see your
network listed, you can click the
Refresh button.)
If the network utilizes wireless
security, you will need to configure
security on the Adapter. If not, you
will be taken directly to the Link
C
Information screen, shown in Step B.
A
D
Set Up the Adapter
Available Wireless
Networks
If wireless security has been
enabled on this network, you
will see one of the following
IMPORTANT: All of the devices on
wireless security screens. If
your network must use the same
your network utilizes WEP
encryption method to work correctly.
(Wired Equivalent Privacy)
encryption, the WEP Key
Needed for Confirmation
screen will appear.