Table of Contents
Advertisement
EasySet Programming
in Icons
Your Detector
Intro
Operation
Customer
EasySet Programming
Assistance
All user mode settings on your detector can be changed by using
Program mode. When changing the settings, please keep in mind:
Intro
Operation
Customer
Warranty
Assistance
Buttons can have multiple functions.
Secondary Icons
All settings will be stored in memory when the power is
turned off and recalled when the power is turned back on.
condary Icons
The procedure for using Program mode is shown on page 7.
in Icons
NOTE
Notice
You cannot enter Program mode during an alert. The unit will not detect
Notice
signals while in Program mode. During programming, if no buttons are
pushed for 10 seconds, the unit will automatically exit Program mode
Intro
Operation
Customer
Warranty
Assistance
and save the last settings.
Programming User Modes
The tables on pages 8 through 9 show you how to program all user modes
condary Icons
and the settings you can choose from.
NOTE
On the following pages, you will find more detailed
explanations of each setting.
Notice
See page 14 for instructions on setting the IntelliMute activation point.
See page 16 for instructions on calibrating the compass.
See page 21 for instructions on using SmartPower.
English
6
Warranty
Your Detector
Intro
Operation
Set/City Button
•
Press and release
Select/Dim Button
Press and release
Secondary Icons
Press and hold/Press and release
To use Program Mode
Press and hold the
Program/Mute button
Notice
for two seconds.
While the programming
instructions are
scrolling, press and
release the Select/Dim
button to cycle through
the user modes.
With the user mode you
wish to change displayed,
press and release the
Set/City button to
change the setting.
To move to the next
selection, press the
Select/Dim button again.
When you have finished
programming any or
all of the user modes,
press and release the
Program/Mute button
to exit Program mode.
Or simply wait
10 seconds without
pushing any buttons.
EasySet Programming
Customer
Warranty
Assistance
Program/Mute Button
Tone
Visual Display
Three beeps
Program will appear.
PROGRAM
Then brief programming
instructions will scroll through
the display three times.
One beep with
As each mode is displayed,
each button press
the current setting for that
mode will be shown.
One or two beeps,
The setting you select will
depending on your
be shown.
selection
One beep
When you exit Program
mode, the new setting will
automatically be saved and
EXIT PROGRAM and Settings
Saved! will appear in the display.
EXIT
PROGRAM
Nothing comes close to a Cobra
Settings
Saved!
®
7
Hide quick links:
Advertisement
Table of Contents
