Configuring The Network Pc Card; Configuring The Network Pc Card For Windows 95, 98, And Me - Linksys WDT11 User Manual

Instant wireless series network pc card & pci adapter

Hide thumbs Also See for WDT11:

Table of Contents

Enlarged version

5. The Digital Signature Not Found screen is a notification by Windows 2000.

However, this does not mean that there is a problem. Click the Yes button to

continue.

6. Windows will now install the driver files. Click the Finish button when

completed. Windows may prompt you for necessary files from your

Windows 2000 CD. Insert your Windows 2000 CD if requested. The instal-

lation is complete. Continue on to the Configuration Utility section.

Instant Wireless

Series

Network PC Card and PCI Adapter

Configuring the Network PC Card

After installing the Network PC Card, Windows 95, 98, or Millennium will

automatically identify the card. Next, you will need to configure the Network

PC Card's driver software.

NOTE:

For the easiest way to configure your Network PC Card, please refer to

the Configuration Utility section.

1. After installing the Network PC Card, the Instant Wireless - Network PC

Card Properties screen (shown below) may automatically come up. If it

does not appear automatically, click on the Start button, choose Settings

and then Control Panel. Double click on the Network icon and choose the

the Instant Wireless Network PC Card. Click the Properties button, and

then choose the Advanced tab.

Select Authentication Algorithm from the list provided and select a Value

from the drop down menu on the right. As indicated, you should always use

WECA Compliant unless you have some other reason to do so. Choose

Channel to continue or the OK button to finish. If you choose to finish now,

continue to the Installing Network Protocols section.

Table of Contents

Wpc11