Settings
Your Detector
Intro
Operation
Customer
Warranty
Radar Alert Settings
Assistance
The detector allows you to choose whether it will show alerts on the X, K and
Ku bands. The factory settings are: X Band and K Band On; Ku Band Off.
To Turn X Band On and Off
Secondary Icons
While no signal is
Tone
Visual Display
being detected, press
X On = Two beeps
X will blink twice in the display
and hold both the
Dim and Mute buttons
X Off = One beep
X will blink once in the display
for four seconds.
Notice
To Turn K Band On and Off
While no signal is
Tone
Visual Display
being detected, press
K On = Two beeps
K will blink twice in the display
and hold both the
Mute and City buttons
K Off = One beep
K will blink once in the display
for four seconds.
To Turn Ku Band On and Off
While no signal is
Tone
Visual Display
being detected, press
Ku On = Two beeps
X and K will blink twice in the display
and hold the City
button for four
Ku Off = One beep
X and K will blink once in the display
seconds.
14 English
Detection
Your Detector
Intro
Operation
Customer
Warranty
Detection
Assistance
Signals Detected
The tables on the following pages show you the types of Signals your
detector will detect, as well as the visual alerts it provides for each of them.
Secondary Icons
Audio Alerts
A distinctly different Alert tone is used for each type of signal detected
(including separate tones for each laser signal). For X, K, Ka and Ku band
radar signals, the tones will repeat faster as you approach the signal
Notice
source. The repeat rate of the tones gives you useful information about
the signal detected. (See responding to alerts on page 18.)
Visual Display
An indication of the type of signal detected will appear in the UltraBright
data Display. During X, K, Ka and Ku alerts, a number will also appear,
indicating the strength of the signal detected. (1 = weakest, 5 = strongest)
X Signal Detected
K Signal Detected
Ka Signal Detected
2
3
X
K Ka V S
X
K
Ka V S
X K
Ka
V S
POP Signal Detected
During pop alerts, the letter P will
appear; and during laser alerts,
P
X K Ka V S
the letter L will appear, instead of
the signal strength indication.
VG-2 Alert Signal
During VG-2 or Spectre I or IV+
Detected
alerts, the letter V will appear.
It will be steady during VG-2
c
X K Ka
V
S
and blink during Spectre I or IV+.
Safety Alert Signal Detected
During Safety Alert the letter S
will appear.
c
X K Ka V
S
Nothing Comes Close to a Cobra
•
Ku Signal Detected
5
4
X K
Ka V S
Laser Signal Detected
L
X K Ka V S
Spectre I or IV+ Alert
Signal Detected
c
X K Ka
V
S
®
15