Trouble Shouting Guide - Panasonic BL-WV10A Service Manual

Wireless camera monitoring system

Hide thumbs Also See for BL-WV10A:

Table of Contents

1. Remove five Screws (B).

2. Remove the solder of Antena Cable (two point A

and C).

3. Remove Main Board.

4. Remove Antenna.

8. TROUBLE SHOUTING GUIDE

- Press the Factory default reset button to reset to the original defaults.

- Connect the PC to each LAN1~4 port with the LAN cable.

- Insert the wireless network card (802.11b/g) into the PC.

(Confirm that the BL-WV10A unit and the wireless network card are

placed in such a way that radio waves can travel between them)

- Set up your PC.

8.1. PC SETUP

System requirements

- A notebook PC with a CardBus slot and Windows XP installed as the

operating system

Table of Contents