Table of Contents
Advertisement
Appendix
Client for Netware Networks
If you plan on connecting to a Novell NetWare
workstation, click on the Add button. Highlight
Client and click on Add. In the Network Client
window, select Manufacturer and choose
Microsoft. Highlight Client for NetWare Networks
on the right, then click OK.
IPX/SPX-compatible Protocol
Click on the Add button. Choose Protocol and
click on the Add button. Select Manufacturer and
choose Microsoft. Under the Network Protocol
box, highlight IPX/SPX-compatible protocol.
Click OK. If you have a Dial-Up or AOL adapter
installed, remove the IPX-SPX-Compatible proto-
col for Dial-Up or AOL
NetBEUI
Click on the Add button. Select Protocol, then
click on Add. Under Manufacturer, choose
Microsoft. Under Network Protocol, highlight
NetBEUI. Click OK. If you have a Dial-Up
adapter installed, remove the NetBEUI for Dial-Up
Adpater protocol.
4. If you were referred to this section by the
Windows setup instructions, please return to the
setup now on page 7 and continue following the
instructions.
Note: For the installation, setup, and troubleshoot-
ing of the TCP/IP protocol, contact your system
administrator or refer to your Windows 98 docu-
mentation. Linksys does not provide technical
support for the TCP/IP protocol.
22
Advertisement
Table of Contents
