Network Component Configuration - Linksys USB100H1 User Manual

Homelink series phoneline + 10/100 usb network adapter

Hide thumbs Also See for USB100H1:

Table of Contents

Phoneline + 10/100 USB Network Adapter

Network Component Configuration

1. Once you are back at the Windows 98 desktop, click on your taskbar's

Start button, then Settings, then Control Panel, then double-click the

Network icon.

2. The Network window will appear. Click on the Configuration tab. A

window similar to the one below will appear. There may be other compo-

nents listed in addition to the ones shown below (for example, a Dial-up

Adapter), which is normal.

• Client for Microsoft Networks

• Linksys EtherFast 1/10/100 USB Network Adapter

• IPX/SPX-compatible Protocol

• NetBEUI

• TCP/IP

If any of the components shown above are missing, however, you'll need

to manually install them. If so, refer to Manually Installing Network

Components in Windows 98 on page 34 now.

Table of Contents