Linksys HPN200 User Manual page 12

6. A window will appear verifying that the Linksys HomeLink
Network Adapter has been detected. Click the OK button.
7. Now you will be back at the setup wizard. You will see the HomeLink
listed in the Network Adapters window. Click the Next button.
8. Select your protocols for the card.
18
®
Linksys HomeLink Series
® Phoneline
® card
Phoneline 10M Network Card
9. Verify that your network services are correct. If you are unsure as to how
your services should be set up, consult your NT documentation. Click the
Next button.
10. The setup wizard will tell you that it's ready to install your networking
components. Click the Next button.
11. Windows NT may tell you that it needs to copy some NT system files onto
your hard drive. If this is the case, remove the Linksys HomeLink
from your CD-ROM drive and insert your Windows NT CD-ROM. Type
D:\i386 (where D is the letter of your CD-ROM) and click the Continue
button.
®
CD-
Note
19