Chapter 2
Power on the Media Center Extender
NOTE:
DMA2200
Plug the Media Center Extender's power cord connector to the unit's
power port on the back panel. Plug the cord into an electrical outlet.
There is also an on/off power switch just above the power port. Power on
the unit before starting Device Configuration.
DMA2100
This unit ships with the correct power clip for your region.
Plug the Media Center Extender's power cord connector to the unit's
power port on the back panel. Plug the cord into an electrical outlet.
If needed, pull out the clip covering the power port connector. You can
then snap in the appropriate power clip that matches your main power
outlet. Power clips are used in Europe and Asia.
14
14
Network Setup and Extender Connections
Power on your TV.
Power Switch
DMA2200
DMA2200 Power Cord and Switch
DMA2100
DMA2100 Power Cord
Regional Power adapters
Media Center Extender
Media Center Extender