Q&A; Trouble Shooting - Panasonic NI-S630 Operating Instructions Manual

Q&A
Question
Why click sound or
metallic sound be heard
while using or shaking
the iron?
Why do the clothes
sometimes become
brown after being ironed?
Why are there white
powder/particles coming
out of the steam vents
while using the steam
function (especially when
using " power shot ")?
Answer
These sounds are made by
the internal parts of the iron,
spray mechanism, leakage
prevention, etc., moving
slightly. This is normal.
If there is laundry detergent
remaining on the fabric, the
clothes may become brown
after being ironed.
The powder/particles are
hydrophilic treatment or
impurities and minerals
found in hard water etc.
These are not harmful and

Trouble shooting

Problem
No Make sure the power plug is plugged into
heating socket-outlet.
Fill the water reservoir with tap water up to
" MAX " dot.
If there is no steam, set the steam/dry selector
No
to the steam position, or set the temperature
steam
selector to " MAX ".
For poor steam, move the steam/dry selector
several times, then reset to the steam position.
Poor
Press the power shot button several times
steaming
power
Wait until the thermostat operating indicator
Set the temperature selector to " MAX ".
Push the spray mist trigger several times.
No spray
Fill the water reservoir with tap water up to
" MAX " dot.
Water
Press the power shot button in intervals of at
leaks
least 2 seconds when using the " power shot ".
from
steam Wait until the thermostat operating indicator
vents
Clothes
are water. There may be contaminants in the
marked iron/cup.
Causes, Solution
17