Cobra ESD-9100 User Manual page 3

9100.MANUAL 8/9/00 12:12 PM Page 4
Installation
Dash Dash Mounting
Mounting
1 Peel protective
paper off one side
Note
of hook and loop
It will be easy for you to
material.
remove and reinstall your
Cobra ESD-9100 detector at
any time using this hook
and loop material on the
dashboard.
Remember: Without the
means to adjust the angle
of the detector (when
3 Peel top paper off.
mounted as above), be
sure you that your Cobra
ESD-9100 has a level,clear
view of the road before you
attach the hook and loop
material.
Plug power cord
5
into detector.
4
Turn On and Adjust Volume
Rotate ON-OFF Volume Control to left (away
1
from you). An audible "tone" will indicate the
2 Place on dash.
unit is on. PWR LED on front of unit
is illuminated.
4 Place detector on
hook and loop pad.
Plug power cord
6
i nto cigare t te lighte r.
Quick Start
Turn On and
Adjust Volume
5