Advertisement
1.3.
ELECTRICAL SAFETY.
USE ONLY SUPPLIED CHARGER PLUG FOR VAC.
WARNING!
p
p
You must
1.3.1. The Electricity At Work Act 1989
1.3.2. The Health & Safety at Work Act 1974
If in any doubt about electrical safety, contact a qualified electrician.
1.3.3. You must ensure that you:
3
DO NOT
3
3
3
7 DO NOT
7 DO NOT
7 DO NOT
7 DO NOT
7 DO NOT
2.
SPECIFICATIONS.
Fig 1
3.
OPERATION.
3.1
Charging Battery Pack.
WARNING! Ensure you read and understand safety instructions before use.
p
p
Note: The battery pack will become slightly warm to the touch while charging. This
is normal and does not indicate a problem.
IMPORTANT! When using your vac continuously, the batteries will become
p
hot. You should let a hot battery pack cool down for approximately 30
p
minutes before attempting to recharge.
BATTERY PACK
CHARGING
INDICATOR
(RED)
BATTERY CHARGER
CHARGING INDICATOR (GREEN)
3.2
Operating Vac.
3.3
To Vacuum Wet Spills.
NOTE: Before attempting to vacuum wet spills make sure the liquid separator and
wet adaptor are fitted (fig 3).
DO NOT Fill the collection tank past the full mark or you may damage the unit.
WET ADAPTOR
Fig 2
CHARGING
NOZZLE RELEASE BUTTON
ADAPTOR
MAX. LIQUID FILL LINE
3.4
To vacuum dry spills, dust and dirt.
Store the vac in a dry location out of reach of children. If the vac is to be stored for a long
period of time remove the battery from the vac and store in a safe location.
BRUSH NOZZLE
LIQUID SEPARATOR
Fig 3
DUST COLLECTOR
FILTER
Fig 4
CREVICE TOOL
Advertisement
