Linksys EtherFast BEFW11P1 User Manual page 36

How can I receive uncorrupted FTP downloads? If you are experiencing cor-
rupted files when you download a file with your FTP client, try using anoth-
er FTP program.
Web page hangs, corrupt downloads, or nothing but junk characters are being dis-
played on the screen. What do I need to do? Force your NIC to 10Mbps or half
duplex mode, and turn off the "Auto-negotiate" feature of your NIC as a tem-
porary measure. (Please look at the Network Control Panel, in your Ethernet
Adapter's Advanced Properties tab.). Check our website at www.linksys.com
for more information.
If all else fails in the installation, what can I do? Reset the Wireless AP +
Cable/DSL Router by holding down the reset button for at least three seconds
and reset your cable or DSL modem by powering the unit off and then on.
Obtain and flash the latest firmware release that is readily available on
Linksys website, www.linksys.com.
How can I find upgrades to the Wireless AP + Cable/DSL Router's firmware? All
Linksys firmware upgrades are posted on the Linksys website at
www.linksys.com, where they can downloaded for free. The Wireless AP +
Cable/DSL Router's firmware can be upgraded with TFTP programs.
Will the Wireless AP + Cable/DSL Router function in a Macintosh environment?
Yes, but the Wireless AP + Cable/DSL Router's web-based utility is accessi-
ble only through Internet Explorer or Netscape Navigator, versions 4.0 or
higher for Macintosh. (Linksys does not provide technical support for the
Macintosh platform.)
With which type of firewall is the Wireless AP + Cable/DSL Router equipped? The
Wireless AP + Cable/DSL Router uses NAT and TCP/IP port inspections.
Does the Wireless AP + Cable/DSL Router do stateful packet inspection? No
I am not able to get the web configuration screen for the Wireless AP + Cable/DSL
Router. What can I do? You may have to remove the proxy settings on your
Internet browser, e.g., Netscape Navigator or Internet Explorer. You may also
need to remove any Firewall software you may be running or remove the dial-
up settings on your browser. Check with your browser documentation.
65
Instant Broadband Series
TM
Etherfast Wireless AP + Cable/DSL Router with PrintServer
®
What is DMZ? Demilitarized Zone (DMZ) allows one IP Address (computer) to
be exposed to the Internet. Some applications require multiple TCP/IP ports
to be open. It is recommended that you set your computer with a static IP if
you want to use DMZ.
If DMZ is used, does the exposed user share the public IP with the Wireless AP +
Cable/DSL Router? No.
Does the Wireless AP + Cable/DSL Router pass PPTP packets or actively route
PPTP sessions? The Wireless AP + Cable/DSL Router allows PPTP packets
to pass through.
Is the Wireless AP + Cable/DSL Router cross-platform compatible? Any platform
that supports Ethernet and TCP/IP is compatible with the Wireless AP +
Cable/DSL Router.
Will the Wireless AP + Cable/DSL Router allow me to use my own public IPs and
Domain, or do I have to use the IPs provided by the Wireless AP + Cable/DSL
Router? The router mode allows for customization of your public IPs and
Domain.
Does the Wireless AP + Cable/DSL Router replace a modem? Is there a cable or
DSL modem in the Wireless AP + Cable/DSL Router? No, this version of the
Wireless AP + Cable/DSL Router must work in conjunction with a cable or
DSL modem.
Which modems are compatible with the Wireless AP + Cable/DSL Router? The
Wireless AP + Cable/DSL Router is compatible with virtually any cable or
DSL modem that supports Ethernet.
What are the advanced features of the Wireless AP + Cable/DSL Router? The
Wireless AP + Cable/DSL Router's advanced features include Filters,
Forwarding, Dynamic Routing, Static Routing, and DMZ host.
Does Linksys provided syslog support? No, Linksys does not currently provide
syslog support.
How can I check whether I have static or DHCP IP Addresses? Consult your ISP
to confirm the information.
66