Getting Started - Cobra ESD 7000 Operating Instructions Manual

Installation
Your Detector
Dashboard Mounting
1. Place the detector on the dashboard to find a location
where the unit has a clear, level view of the road.
The angle can NOT be adjusted after mounting.
2. Remove the paper backing
from one (1) side of the
hook-and-loop fastener.
3. Attach the pad to the
dashboard at your chosen
location and remove the
other paper backing.
4. Attach the detector to the
hook-and-loop fastener.
You can remove and
reattach the unit as
often as you like.
6. Plug the power cord
into the detector.
7. Plug the cigarette lighter
adapter on the power
cord into your vehicle's
cigarette lighter.
English
4

Getting Started

Your Detector
Getting Started
On-Off/
Volume Control
Power On
Rotate clockwise
(away from you)
X K ⁄ L V ⁄
•
K a S Cty
To Turn On The Unit And Adjust The Audio Volume
Rotate the On-Off/
Tone
Volume control
Three (3) beeps
clockwise (away
from you).
NOTE
In some vehicles, power is supplied to the cigarette lighter
even while the ignition is Off. If this is the case with your
vehicle, you should turn Off or unplug your detector when
parking for lengthy periods.
•
Visual Display
The power indicator will light
up in the display indicating
that the power is On .
Nothing comes close to a Cobra ® 5