Before Using the Product for the First Time
Be sure to charge the
product.
Connect the AC adapter
in the order of ①, ②, ③
and charge the product.
Two beeps sound when
charging begins.
Open the body and
check that the battery
mark is "
charge), then disconnect the microUSB cable from the unit.
Also disconnect the AC adapter from the outlet.
The time required for a full charge is ordinarily about 6 hours (at a
●
temperature of 25° C), however it may take longer depending on the
temperature and conditions of use.
Do not discontinue charging before the battery is fully charged.
●
The power turns ON automatically when the body is opened.
When the power turns ON for the first time, a screen appears for
setting the date and time. Set the date and time in this screen.
<Example>
For 2021/4/16 → Enter "21 04 16"
For 3:45 PM → Enter "15 45"
If you are setting 13 to 23 for the hour, you can omit the
AM/PM setting.
● Use the keyboard to enter the numbers. Press the cursor keys
[▲] [▼] [◀] and [▶] to move the cursor up/down/left/right.
Changing the date and time
Touch "
" ( Settings) in the HOME screen. Scroll the pages, select
"日付と時刻の設定" (Date and Time), and set the date and time.
Notes:
U se the AC adapter within the specified voltage range (AC 100 to 240 V)
●
T he battery mark will change as follows;
●
Charge the battery when the mark become
During charging, the mark is
②
Household
AC outlet
" (full
→
→
Pay attention to
the direction of the mark.
Insert with the
mark facing down.
Insert with the
label facing down.
→
→
.
③
①
Insert with the
mark facing down.
/
/
microUSB port
Front
of unit
.