Advertisement
Quick Links
All site activity must be thoroughly planned before work commences to
These instructions form guidance for the Dust Fighter. Non-standard
applications should be approved by a suitably qualified engineer.
Ensure all personnel engaged in installation operations are properly briefed
and adequately supervised by a competent person.
Rev
Date
Comments
1.2
28/06/22
Branding update
Dust Fighter
(Dust Suppression System)
Important Notes
identify hazards and assess risk.
THIS USER GUIDE IS NOT CONTROLLED WHEN PRINTED
A video showing this product is
available to
YouTube channel.
IF IN ANY DOUBT SEEK FURTHER ADVICE:
ON FREEPHONE - 0800 111 4665
Initial
DSW
watch now
on our
User Guide
Dust fighter_user guide_1.2_EN_28-06-22
Advertisement
Summary of Contents for Generac Power Systems Dust Fighter DF Smart
- Page 1 User Guide Dust Fighter (Dust Suppression System) Important Notes All site activity must be thoroughly planned before work commences to identify hazards and assess risk. These instructions form guidance for the Dust Fighter. Non-standard applications should be approved by a suitably qualified engineer. Ensure all personnel engaged in installation operations are properly briefed and adequately supervised by a competent person.
-
Page 2: Warning Symbols
User Guide SAFETY Common Symbols and Meanings Safety Note: We recommend using hand and eye protection when operating hydraulic equipment PERSONAL PROTECTIVE EQUIPMENT (PPE) Use eye protection Use hearing protection Wear protective gloves Wear head protection Wear protective footwear WARNING SYMBOLS General warning Crushing of hands Hot surface or oil... -
Page 3: Equipment Identification
C. Stop Button G. Water Filler K. Forklift Pockets D. Tilting Blower Knob H. Water Tap Equipment Specification Dust Fighter DF Smart Item Code SHOP001.07 Electrical Engine Single Phase 230V 50Hz - 2.2 kW Water Connection Express Type 1/2” Quick Connection... -
Page 4: General Checks
User Guide General Checks Check the following points before operating the Dust Fighter: Ensure the Dust Fighter is secured and positioned on level ground Ensure the immediate area surrounding the unit is dry, clean and free of debris ... -
Page 5: Preliminary Checks
User Guide Preliminary Checks Before use, check that the Dust Fighter: Is positioned on flat ground in a well ventilated area Has protective barriers positioned approximately 2m around the unit Is correctly connected to a suitable water supply ... -
Page 6: Stopping The Unit
User Guide Adjusting the Jet Angle 1. Pull the tilting blower knob ‘A’ 2. Use handle ‘B’ to tilt the Dust Fighter blower to the desired angle. 3. Release the tilting blower knob ‘A’ to lock the unit in position. Stopping the Unit Close the water valve ‘A’...