Static Filtering - Linksys EG24M User Manual

STATIC FILTERING

If you select Static Filtering from the Advanced Management screen, the fol-
lowing Static Filtering screen will appear, with Source MAC Address high-
lighted.
From the Static Filtering screen, you can select Source MAC Addresses or
Destination MAC Addresses for static filtering by highlighting one of these
options and pressing the Enter key.
If you select Source MAC Address and press Enter, the SRC MAC Out-Filter
screen will appear.
If you select Destination MAC Address and press Enter, the DST MAC Out-
Filter screen will appear.
58
Linksys EtherFast II Series
®
10/100 Managed 24-Port GigaSwitch
From either of these screens, you are able to:
• Hold down the Shift key and press the "+" key to add a specific MAC
address to be filtered.
• Press the "-" (hyphen) key to delete a specific MAC address from being fil-
tered. Since there is no precautionary message that appears before you
delete a specific MAC address, be sure you want to delete the address
before you begin.
• Press "S" to search through the list of MAC addresses in the static filtering
database. The static filtering database maximum capacity is 64.
When you finish, press the Esc key until you return to the desired screen.
59