NEC P547UL User Manual page 65

Reset the keystone and pincushion adjustment to the default value
1. Display the [GEOMETRIC CORRECTION] screen, and make sure [KEYSTONE] is selected at
[MODE].
2. Press the ▼ button to select [RESET] and press the ENTER button.
• Confirmation message is displayed on.
3. Move the cursor onto [YES] using either ◀ or ▶ button and then press the ENTER.
NOTE:
• All adjusted values set in the [KEYSTONE] adjustment are reset to initial values.
TIP:
• Distortion when projecting on specially shaped surfaces (cylindrical or spherical surfaces, for example) can be corrected using our
ProAssist application. Please download ProAssist from our web site.
https://www.sharp-nec-displays.com/dl/en/index.html
44
3. Convenient Features