Warranty; Measuring Method; Measuring Systems - Toshiba LTD121EA43G Manual

9. Warranty

Finish of warranty term is until arrival at your factory. (except defect which is clearly responsible for Toshiba Matsushita
Display Technology Co., Ltd.)

10. Measuring Method

10.1 Measuring System
(1) The measurement point is the center of the active area.
(2) Photometer : BM-7/BM-5A TOPCON (Aperture 2deg.)
(3) As flat light source, Toshiba Matsushita Display Technology Co., Ltd. original backlight for LTD121EA4X should be used
except for the measurement of transmittance.
Toshiba Matsushita Display Technology Co.,Ltd
Specification No.
Flat light source
LCD Module without Backlight
Screen Center
500 mm
LCD Module without Backlight Driving Circuit
Date: 2004-04-20
Date:
Photmeter
Light Shielded Room
New No. LTD121EA43G-01
Old
No.
←# Special ←& Addition
Sheet 34
← Change