Cobra microTalk PR 4750 WX Owner's Manual page 10

Mode Functions
Operation
Intro Operation Customer
Intro Operation To recall a stored memory channel location:
Main Icons
Lock/Mode Button
Assistance
1. Press the Lock/Mode button until the Memory
icon and the memory location number flash
on the display.
2. Press the Channel Up or Channel Down
Memory Icon
Secondary Icons
button to select a memory location
Secondary Icons
Intro Operation
(0 through 9).
Channel Buttons
Notice
Secondary Icons
3. Press the Talk button to return to Standby
Notice
mode on the selected memory location.
Notice
While recalling a stored memory location,
if you do not press any buttons for 15 seconds,
your radio will automatically return to Standby
mode on the channel/privacy code displayed
before you entered mode functions.
14 English
Warranty
Customer Warranty
Assistance
Customer Warranty
Assistance
If a location has been programmed
before, its associated channel/privacy
code will be shown on the display.
A memory location can be reprogrammed
at any time it is displayed. Press the
Hi•Low/Enter button to begin.
Operation
Introduction
Intro Operation
To de-program a memory location:
Intro Operation Customer
Lock/Mode Button
Assistance
1. Press the Lock/Mode button until the
Memory icon and the memory location
flash on the display.
2. Press the Channel Up or Channel Down
Memory Icon
Secondary Icons button to select the memory location
Secondary Icons
(0 through 9).
If a location has been programmed
Channel Buttons before, its associated channel/privacy
code will be shown on the display.
Notice
3. Press the Hi•Low/Enter button. The channel
Notice
numbers will flash on the display.
Hi•Low/Enter Button
4. Press the Channel Up or Channel Down
button to select Channel 0.
5. Choose one of the following:
a. Press the Hi•Low/Enter button to enter
Channel 0
the channel/privacy code in the selected
memory location and return to the
beginning of memory location options.
b. Press the Lock/Mode button to
enter the channel/privacy code in
the selected memory location and
proceed to other functions on the
channel/privacy code displayed
before you entered mode functions.
While de-programming a memory location,
if you do not press any buttons for 15 seconds,
your radio will automatically return to Standby
mode on the channel/privacy code displayed
before you entered mode functions.
Customer Assistance Warranty
Customer Warranty
Warranty
Assistance
Nothing comes close to a Cobra ® 15