Page 1
UAPF-X1 -- In-Line Passive RF Filter General Description The Shure UAPF-X1 attenuates frequencies out- side the X1 band. Use only with Shure X1 band wireless products. Requires remote mounting of antennas. Features • Filters out extraneous RF signals • Integrated threaded adapter mounts easily to...
Page 2
2. Use low-loss coaxial cable (sold separately) to connect to the receiver (or antenna distribution system), as shown. Note: The UAPF should be placed before any inline amplifier, such as the Shure UA830. Cable Maintenance To maintain top performance for UA825, UA850 or UA8100 antenna cables: •...
Page 3
Shure Incorporated Caution: Use only Shure antenna accessories to ensure the best operation. Do not use splitters, combiners, or antennas that provide a DC ground. If necessary, use a BNC DC block device, such as the JFW Industries Model 50DB-002.
Page 4
Shure Incorporated Connector Input and output: Female, BNC-type Case Aluminum die-casting, black painted Dimensions Without Mounting Stand: 67 mm x 32 mm x 112 mm (H x W x D) With Mounting Stand: 108 mm x 32 mm x 112 mm (H x W x D)