Locking The Control Panel; Factory Restore Of All Settings - Korg STAGE VINTAGE SV2S-88 User Manual

42| The Piano

Locking the control panel

We have shown you how to change the sounds and effects. Now we will tell
you how to prevent to make any change! This can be useful if you want to
avoid inadvertently changing the settings while playing.
1 Press the TOUCH and FUNCTION buttons together to lock the control panel.
Their LEDs will start blinking.
The only controls that will remain accessible are the MASTER VOLUME knob
and the POWER switch.
2 Press either the TOUCH or FUNCTION button to unlock the control panel.
NOTE: When the instrument is turned off, locking is reset.

Factory restore of all settings

After making several changes, you might want to restore the original, fac­
tory status of the SV­2 (including the favorite sounds and global settings):
1 Turn the instrument off.
2 Keep the FUNCTION button pressed.
3 Without releasing the FUNCTION button, turn the instrument on.
4 When its LED starts flashing, release the FUNCTION button.
5 Press the FUNCTION button again to confirm the restore operation.
6 At the end, all settings will be reset.